C95510HT

ALLOY SEARCH MODULE

GET STARTED
SEARCH CLEAR

SPECIFICATION CROSS-REFERENCE CHART

Aluminum bronze is the highest strength standard copper based alloy. Concast produces C95400, C95500 and C95900 in standard sizes of rounds, tubes and rectangles. Aluminum in conjunction with iron and nickel in C95500 acts as a strengthener in these alloys. All of the aluminum bronzes can be heat treated, further increasing tensile strengths.

Info

Product Description: Nickel Aluminum Bronze
Solids: 1/2" to 9" OD
Tubes: 1 1/8" to 9" OD
Rectangles: Up to 15"
Standard Lengths: 24"
Shape/Form: semi-finished, mill stock or near-net shapes, anode, bar stock, billet/bloom, squares, hex, plate, profile or structural shape, flats/rectangular bar

Typical Uses

Industrial: bearings requiring abrasion resistance, good ductility, retention of hardness at moderate temperatures

Similar or Equivalent Specification

CDA ASTM ASARCON SAE AMS Federal Military Other
C95510HT     J461
J462
4880      

Chemical Composition (according to AMS 4880)

Alloy Cu% Sn% Zn% Fe% Ni%1 Al% Mn%
1Ni value includes Co.
Note: Cu + Sum of Named Elements, 99.8% min. Single values, unless otherwise noted, represent maximums.
C95510HT 78.00 min  
0.20
 
0.30
2.00-
3.50
4.50-
5.50
9.70-
10.90
 
1.50

Machinability

Alloy Machinability Rating Density (lb/cu in.)
C95510HT 50 0.272

Mechanical Properties (according to AMS 4880)

Tensile Strength (min) Yield Strength (at .5% extension under load min) Elongation (in 2in. or 50mm min, %) Brinell Hardness (min) Remarks
Ksi MPa Ksi MPa % min to max BHN  
105 724 62.5 431 9 192 to 248 Castings <4.0, Heat Treated
95 655 56.0 386 9 192 to 248 Castings 4.0+, Heat Treated

FIND A PRODUCT

SEARCH BY
CDA NUMBER