- Heat Treated Condition
- Bronze Family: Nickel Aluminum Bronze
- Solids: 1/2" to 9" OD
- Tubes: 1 1/8" to 9" OD
- Rectangles: Up to 15"
- Standard Lengths: 24" Maximum Length
- » Download C95520HT Spec Sheet (.pdf)
Typical Uses
- Builders Hardware Window Hardware
- Consumer Musical Instruments, Piano Keys
- Electrical Electrical Hardware
- Fasteners Stuffing Box Nuts
- Industrial Machine Parts, Glass Molds, Welding Jaws, Wear Plates, Air Craft Components, Pickling Equipment, Valve Guides, Piston Guides, Valve Seats, Pump Fluid Ends, Glands, Worms, Worms Wheels, Hot Mill Guides, Landing Gear Parts, Sewage Treatment Applications, Valve Components, Bearings, Gears, Bushings, Valve Bodies, Landing Gear Parts, Hand Gun Recoil Mechanisms
- Marine Ship Building, Covers for Marine Hardware, Marine Applications, Marine Hardware
- Ordnance Government Fittings
Similar or Equivalent Specification
| CDA |
ASTM |
ASARCON |
SAE |
AMS |
Federal |
Ingot# |
Military |
Other Desc |
| C95520HT |
B505 |
|
|
|
|
|
|
|
Chemical Composition (according to ASTM B505-08)
| Cu% |
Sn% |
Pb% |
Zn% |
Fe% |
Ni% |
Sb% |
P% |
S% |
Al% |
Mn% |
Si% |
|
Note: Single values represent maximums.
- * Chromium content shall be 0.05 max, Cobalt 0.20 max and Silicon 0.15 max.
|
| 74.50 min |
0.25 |
0.03 |
0.30 |
4.00-5.50 |
4.20-6.00 |
N/A |
N/A |
N/A |
10.50-11.50 |
1.50 |
N/A |
Mechanical Properties (according to ASTM B505-08)
| Tensile Strength (min) |
Yield Strength (at .5% extention under load min) |
Elongation (in 2in. or 50mm min, %) |
Brinell Hardness (min) |
Remarks |
| Ksi |
MPa |
Ksi |
MPa |
|
|
|
- † Yield strength 0.2% offset
|
| 125 |
862 |
95† |
655† |
2 |
262 (3000 kg) |
|
Machinability
| Alloy |
Rating |
Density |
| C95520HT |
45 |
0.272 |
No information available for physical, fabrication or thermal properties.
