C94100

ALLOY SEARCH MODULE

GET STARTED
SEARCH CLEAR

SPECIFICATION CROSS-REFERENCE CHART

Cast

The lead content in these alloys is between 7 percent and 30 percent. High-leaded tin bronzes are free cutting and retain favorable thermal conductivity and good lubricity due to the lead content. The high-leaded tin bronzes are ideal for bearing applications where there could be a loss of the lubrication boundary. These alloys perform excellent in unforgiving environments where foreign matter may be present, such as dirt and other foreign materials. The high-leaded alloys are able to envelope foreign matter due to their malleable nature and, in doing so, protect the wear surface of a mating part such as a shaft.

Info

Product Description: High-Leaded Tin Bronze
Solids: 1/2" to 10" O.D.
Tubes: 1" to 16" O.D.
Rectangles: Up to 10"
Standard Lengths: 144"
Shape/Form: semi-finished, mill stock or near-net shapes, anode, bar stock, billet/bloom, squares, hex, plate, profile or structural shape, flats/rectangular bar

Typical Uses

Industrial: thrust block

Similar or Equivalent Specification

CDA ASTM Asarcon SAE AMS Federal Military Other
C94100 B505
B505M
520     QQ-C-390, E5 MIL-B-16261, Grade X  

Chemical Composition

Cu% Pb% Sn% Zn% Fe% P%1 Ni%2 Al% S%3 Sb% Si%
Chemical Composition according to ASTM B505/B505M-18

1For continuous castings, P shall be 1.5% max.   2Ni value includes Co.   3For continuous castings, S shall be 0.25% max.
Note: Cu + Sum of Named Elements, 98.7% min. Single values represent maximums.
72.00-
79.00
18.00-
22.00
4.50-
6.50
 
1.00
 
0.25
 
1.50
 
1.00
 
0.005
 
0.25
 
0.80
 
0.005

Machinability

Copper Alloy UNS No. Machinability Rating Density (lb/in3 at 68 °F)
C94100 80 0.336

Mechanical Properties

Mechanical Properties according to ASTM B505/B505M-18
Tensile Strength, min Yield Strength, at 0.5% Extension Under Load, min Elongation, in 2 in. or 50 mm min Brinell Hardness (500 kg load) Remarks
ksi MPa ksi MPa % typical BHN  
25 172 17 117 7 50  

FIND A PRODUCT

SEARCH BY
CDA NUMBER