C95400HT

ALLOY SEARCH MODULE

GET STARTED
SEARCH CLEAR

REFERENCE
GUIDE

Continuous Cast • GreenAlloys™

Aluminum bronze is the highest strength standard copper-based alloy. Concast produces C95400, C95500, AMS 4880-C95510, and C95900 aluminum bronze alloys as standard-stocked products in common sizes of rounds, tubes, and rectangles. Aluminum in conjunction with iron and nickel acts as a strengthener in these alloys including C954. All of the aluminum bronzes can be heat treated, further increasing tensile strengths. MORE>>

C95400HT

Product Description: Aluminum Bronze
Solids: 1/2" to 9" O.D.
Tubes: 1 1/8" to 12" O.D.
Rectangles: Up to 15"
Standard Lengths: 24"*
Shape/Form: semi-finished, mill stock or near-net shapes, anode, bar stock, billet/bloom, squares, hex, plate, profile or structural shape, flats/rectangular bar
Compliance: C95400HT is compliant with key legislation including (1) Federal Safe Drinking Water Act - SDWA, (2) S. 3874 Federal Reduction of Lead in Drinking Water Act, (3) California AB1953, and (4) Vermont Act 193

 *Consult mill for other lengths

Typical Uses

Automotive: weld guns
Fasteners: large hold-down screws, nuts
Industrial: bearing segments for the steel industry, bearings, bushings, gears, heavily loaded worm gears, high-strength clamps, landing gear parts, machine parts, pawl, pickling hooks, pressure blocks for the steel industry, pump parts, spur gears, valve bodies, valve guides, valve seats, valves, worm gears
Marine: covers for marine hardware, ship building
Ordnance: government fittings

Note: Also available in non-heat-treated condition.

Similar or Equivalent Specification

CDA ASTM SAE AMS Federal Military Other
C95400 B505
B505M
J461
J462
  QQ-C-390, G5;
QQ-B-671, Class 3
MIL-B-16033, Class 3 Aluminum Bronze 9C

Chemical Composition

Cu% Fe% Ni%1 Al% Mn%
Chemical Composition according to ASTM B505/B505M-18

1Ni value includes Co.
Note: Cu + Sum of Named Elements, 99.5% min. Unless otherwise noted, single values represent maximums.
83.00
min
3.00-
5.00
 
1.50
10.00-
11.50
 
0.50

Machinability

Note: HT = heat treated.
Copper Alloy UNS No. Machinability Rating Density (lb/cu in at 68 °F)
C95400HT 60 0.269

Mechanical Properties

Mechanical Properties according to ASTM B505/B505M-18
Tensile Strength, min Yield Strength, at 0.5% Extension Under Load, min Elongation, in 2 in. or 50 mm min Brinell Hardness (3000 kg load) Remarks
ksi MPa ksi MPa % typical BHN  
95 655 45 310 10 177 Heat Treated

FIND A PRODUCT

SEARCH BY
CDA NUMBER